Request information about this product


    BExCS110-05 Explosion Proof Alarm & Strobe

    The flameproof BExCS110-05 combination alarm horn sounders and Xenon strobe beacons are suitable for Zone 1, 2, 21 & 22. Approved to IECEx, ATEX, Ex EAC and INMETRO standards.

    Sound level ouputs are up to 117dB(A) at 1 metre with a choice of 32 alarm tones and 3 remotely selectable stages. Alarm horn & Xenon beacon may be connected from a single power supply for simultaneous operation or from separate supplies for independent operation. The BEx explosion proof Ex d range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium with a chromate and powder coat finish. All models have dual cable entries, large termination areas containing in & out terminals and an ingress protection of IP66/67.

     

    Alarm Horn Sounder:
    Maximum output: 117dB(A) @ 1 metre [108dB(A) @ 10ft/3m]
    Nominal output: 110dB(A) @ 1m +/- 3dB – Tone 2 [101dB(A) @ 10ft/3m]
    No. of tones: 32 (UKOOA / PFEER compliant)
    No. of stages: 3
    Volume control: Max. 110dB(A); Min. 72dB(A) – Tone 2
    Effective range: 100m/328ft @ 1KHz
    Voltages DC: 12vdc; 24vdc; 48vdc
    Voltages AC: 115vac; 230vac
    Stage switching: Negative or positive
    Beacon:
    Energy: 5 Joules (5Ws)
    Flash rate: 1Hz (60 fpm)
    Peak Candela: 500,000 cd – calculated from energy (J)
    Eff. Intensity: 250 cd – calculated from energy (J)
    Peak Candela: 39,463 cd* – measured ref. to I.E.S.
    Eff. Intensity: 120 cd* – measured ref. to I.E.S.
    Lens colours: Amber, Blue, Clear, Green, Magenta, Red & Yellow
    Tube life : Emissions are reduced to 70% after 5 million flashes
    General:
    Ingress protection: IP66/67
    Enclosure matl: Marine grade copper free LM6 Aluminium
    Enclosure finish: Chromate & powder coated
    Horn material: High impact UL94 V0 & 5VA FR ABS (Red)
    Cable entries: Dual M20 ISO (one stopping plug included)
    Terminals: 0.5 – 2.5mm² (20-14 AWG)
    Enclosure volume: <2 litres
    Line monitoring: Blocking diode included
    EOL Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor
    or diode (DC versions) can be fitted
    Temperature range: -50° to +70°C (-58°F to +158°F)
    Relative humidity: 95% – Additional tropicalisation is recommended for applications where both high relative humidity and high ambient temperatures exist
    Weight: DC: 4.80kg/10.56Ibs AC: 5.00kg/11Ibs
    SPL data +/-3dB(A), Candela with clear lens – at optimum voltage
    [pt_view id="a518b5bema"]